Micro Motion H400F Hygienic Coriolis Meter, 4 Inch (DN100), 316L Stainless Steel, 15 RA Finish
Mass flow accuracy (Liquid)
Up to ±0.05% of rate
Mass flow repeatability (Liquid)
Up to ±0.025% of rate
Volume flow accuracy (Liquid)
Up to ±0.05% of rate
Volume flow repeatability (Liquid)
Up to ±0.025% of rate
Mass flow accuracy (Gas)
Up to ±0.35% of rate
Mass flow repeatability (Gas)
Up to ±0.175% of rate
Density accuracy (Liquid)
Up to ±0.0005 g/cm³ (±0.5 kg/m³)
Temperature accuracy
±1 °C ±0.5% of reading
Sensor maximum working pressure
1,450 psig (100 barg)
Meter approvals, calibrations, and certifications
•CSA •IECEx •ATEX
Micro Motion 2500 Compact 制御室マルチバリアブル流量・密度トランスミッタ
出力変数
質量および体積流量
正味の製品量または流量
温度
密度
濃度
ローカルディスプレイ
なし
電力
最小19.2 ～ 28.8 VDC
6.3 ワット
設置 (過電圧) カテゴリ II、汚染度 2の要件に適合
入出力信号
アクティブ 4～20 mA 出力 × 1
アクティブ周波数出力 × 1
HART
プライマリのミリアンペア出力に Bell 202 信号を重ね合わせ
取付けオプション
35 mm レール取り付け
レールは接地する必要があります
アプリケーションの種類
連続プロセス制御
二相流／同伴ガス
メーター性能検証
危険物に関する認定
非危険場所の環境のみに適合
機能
Micro Motion H400F Hygienic Coriolis Meter, 4 Inch (DN100), 316L Stainless Steel, 15 RA Finish
Minimize variability in process control with superior sensitivity in a compact design
Ensure product consistency and quality with superior density measurement
Enable fast product change-over with self-draining design and superior temperature stability
Choose from options including highly polished 316L stainless steel with a surface finish up to 15 Ra
Gain real-time and in-process measurement integrity assurance with Smart Meter Verification
Realize superior two-phase flow capabilities for batching, loading and entrained air applications from compact, hygienic SST transmitter housings
Broad range of meter approvals and certifications, including; CSA (Class 1 Div 1 groups C and D, Class 1 Div 2 groups A, B, C and D), ATEX, IECEx, Ingress Protection 66/67, and NAMUR
Use in SIP, CIP and sanitary environments where 3-A compliance is required
